Place both pieces together with the fronts facing down

Miniature Flower Gift Box

canada goose outlet germany I made uk canada goose this box as a Mother’s Day gift for my mom. I bought her earrings Canada Goose online and wanted to put them in something fancier than the little box they came in. I used black canada goose jacket and white ebony, but most other kinds of wood will work. Use the hinges to get an idea canada goose coats on sale of Canada Goose Jackets how long you want your box to be. Mine is about 1″x 1/2″ x 3/4″. Feel free to mess around with the sizes. I usually add about an 1/8″ to the length https://www.canadagoosesale.info just in case. canada goose outlet germany

canada goose uk site Mark the wood with cheap Canada Goose a pencil and cut off the piece with a saw. An electric saw will canada goose factory sale work best, but you can make it work without. For this piece I used the saw on a multi tool. canada goose uk site

canada goose outlet houston Cut a cheap canada goose uk second piece with the same dimensions. This will Canada Goose Parka be the lid buy canada goose jacket piece. Sand all of the sides of both pieces with medium canada goose grit sand paper. Even if they already look smooth. Some finishes will look different on wood that has been sanded vs wood that hasn’t. canada goose outlet houston

canada goose outlet store uk Place the lid piece on top of the box piece and canada goose black friday sale make sure they match up. It will probably take a bit more sanding. Use a pencil to mark where you want to cut. You may canada goose uk outlet want to use a ruler or straight edge to make sure the lines are straight and accurate. Leave at least 1/8″ around the edge in all places. If you need it to be a little bigger later you can sand it out. You can use a Dremel if you want to. I used carving knives. canada goose outlet store uk

canada goose outlet vip Use your knife to score along the marked lines. Use a wood carving chisel to start removing wood from the center. Re score the lines with your knife and then continue “scooping” out the Canada Goose Coats On Sale wood with the chisel. Keep doing this until the box is as deep as you want it. This part takes a little patience. Choose which sides of the wood pieces that you want to be the front. Place both pieces together with the fronts facing down. I ended up using the side opposite the one in the first picture. Carefully line them up and make sure all of the canada goose uk shop edges match up. You can sand them a little more later, but try to get it as good as Canada Goose sale possible now. Place the hinges on the back of the box. Once you have them canada goose clearance sale where you want them, use a pencil to mark each of the little holes. canada goose outlet vip

canada goose outlet in new york Check the size of the little nails that go with the hinges. You will need to find a Dremel tip that is about the same size. It can be a little bit smaller, but don’t use one that is larger. Use the Dremel to drill 1/4″ deep canada goose clearance holes exactly on canada goose store each of the pencil marks. One at a time, place the hinges over the holes and use something small and hard to hammer the little nails into the holes. They should go in pretty easy. Canada Goose Online They are usually made out of birch, witch is really soft. You can use other wood if canada goose coats you want to but buy canada goose jacket cheap it will take a lot longer. canada goose outlet in new york

canada goose outlet store montreal These are pretty easy to carve so you can mess around with the shape and size until you find some you like. canada goose outlet store montreal

canada goose outlet store calgary Start by sketching the petal shape onto the wood. Carve out the petal shape and try not to break the petal off of the popsicle stick. Once you uk canada goose outlet have the basic shape of the petal, start rounding all of the edges on one side. On the other side gently scoop out some of the wood in the center to give it a spoon like shape. Lightly sand all surfaces of the petal. canada goose outlet store calgary

canada goose outlet authentic Break or cut your petal off of the popsicle canadian goose jacket stick now. You will need to Canada Goose Outlet make at least four more of them. Depending of canada goose uk black friday the size and shape, you may need to make more. I ended up making six canada goose outlet authentic.

TOP